All checklistsChecklist
Open-circuit breathing apparatus check
The check of one open-circuit set for a surface ERT: at the start of shift, weekly for sets not assigned, and after use.
- Items
- 9, in 4 sections
Set
- Set ID or serialNoteType the number on the label or tag. Stands in for a scan.
- Harness, straps and bucklesPass or fail
- Mask visor clean and undamagedPass or fail
Cylinder
- Cylinder pressureReading against your limit · out of service if it fails · photo every timeRead the gauge and photograph it. Set your minimum from your procedure.
- Cylinder test dateExpiry dateThe next test date stamped or labelled on the cylinder. Warns 30 days before.
Tests
- High pressure leak test passedPass or fail · out of service if it fails
- Low pressure whistle soundsPass or fail · out of service if it fails
- Demand valve works and mask sealsPass or fail · out of service if it fails
Result
- Set resultChoose one · out of service if it fails
Checked by ______________________ Date and time ______________ Unit ______________
No limit is shown here on purpose: set each from the maker’s manual or your own procedure. A starting point: change the items to match your procedure before you rely on them.
Send us your own version of this check
We will build it into Escudo Mining with your items and your rule pack, and show it running on a phone underground with no signal.
Or email us: info@escudoready.com