Skip to content
Book a demo
Items
10, in 3 sections

Unit

  1. Self-rescuer serialNoteType the number on the label or tag. Stands in for a scan.

Inspection

  1. Case undamagedPass or fail · out of service if it fails
  2. Seal intactPass or fail · out of service if it fails
  3. Indicator in the safe bandPass or fail · out of service if it fails
  4. Strap and clip soundPass or fail
  5. WeightReading against your limitFor a CO filter unit: weigh it and record the weight. Remove this item where it does not apply.
  6. Weight above the marked weightReading against your limit
  7. Service life endExpiry dateFrom the unit’s label. Warns 30 days before.

Result

  1. LocationChoose one
  2. Inspection resultChoose one · out of service if it fails

Checked by ______________________   Date and time ______________   Unit ______________

No limit is shown here on purpose: set each from the maker’s manual or your own procedure. A starting point: change the items to match your procedure before you rely on them.

What this checklist asks for

Takes the unit out of service

As the starter is set, a fail on any of these takes the unit out of service until the defect is cleared. You can change what any item does.

  • Case undamaged
  • Seal intact
  • Indicator in the safe band
  • Inspection result

Takes a number against your limit

The limit is yours to set; until you do, the number is kept with no pass or fail.

  • Weight
  • Weight above the marked weight

Questions about this checklist

What does the self-rescuer periodic inspection cover?

10 items in 3 sections: unit, inspection and result.

What happens when an item fails in Escudo Mining?

As the starter is set: 4 items take the unit out of service and 3 items restrict it when they fail; the rest are recorded. You can change what any item does. A failure asks for a photo on 4 items, and the defect goes to the people who fix it.

Does the self-rescuer periodic inspection come with limits?

No. 2 items take a number against a limit (weight and weight above the marked weight), and each limit is yours to set from the maker’s manual or your own procedure. Until you set one, the number is still recorded.

Run it on the phone instead of paper

Open it from the unit’s tag, with or without signal. A failed item becomes a defect with a photo and sets the status as your template says.

Send us your own version of this check

We will build it into Escudo Mining with your items and your rule pack, and show it running on a phone underground with no signal.

Or email us: info@escudoready.com