Skip to content
Book a demo
Items
12, in 6 sections

Chamber

  1. Chamber IDNoteType the number on the label or tag. Stands in for a scan.

On battery

  1. Scrubbing runs on batteryPass or fail · out of service if it fails
  2. Scrubbing run time on batteryReading against your limit
  3. Air conditioning runs on batteryPass or fail · out of service if it fails

Oxygen and gas

  1. Oxygen flow, set and measuredReading against your limitSet the range from the maker’s manual for the chamber’s rated occupancy.
  2. CO and CO2 analyser reads and alarmsPass or fail · out of service if it fails

Seal

  1. Seal and pressure equalisation testReading against your limitThe test the maker sets. Set your minimum from the maker’s manual.

Readings

  1. Inside temperatureReading against your limit
  2. Outside temperatureReading against your limit
  3. Inside CO2Reading against your limit
  4. Inside oxygenReading against your limit

Communications

  1. Communications to surfacePass or fail · out of service if it fails

Checked by ______________________   Date and time ______________   Unit ______________

No limit is shown here on purpose: set each from the maker’s manual or your own procedure. A starting point: change the items to match your procedure before you rely on them.

What this checklist asks for

Takes the unit out of service

As the starter is set, a fail on any of these takes the unit out of service until the defect is cleared. You can change what any item does.

  • Scrubbing runs on battery
  • Air conditioning runs on battery
  • CO and CO2 analyser reads and alarms
  • Communications to surface

Takes a number against your limit

The limit is yours to set; until you do, the number is kept with no pass or fail.

  • Scrubbing run time on battery
  • Oxygen flow, set and measured
  • Seal and pressure equalisation test
  • Inside temperature
  • Outside temperature
  • Inside CO2
  • Inside oxygen

Questions about this checklist

What does the refuge chamber function test cover?

12 items in 6 sections: chamber, on battery, oxygen and gas, seal, readings and communications.

What happens when an item fails in Escudo Mining?

As the starter is set: 4 items take the unit out of service and 2 items restrict it when they fail; the rest are recorded. You can change what any item does. A failure asks for a photo on 4 items, and the defect goes to the people who fix it.

Does the refuge chamber function test come with limits?

No. 7 items take a number against a limit (scrubbing run time on battery, oxygen flow, set and measured, seal and pressure equalisation test and 4 more), and each limit is yours to set from the maker’s manual or your own procedure. Until you set one, the number is still recorded.

Run it on the phone instead of paper

Open it from the unit’s tag, with or without signal. A failed item becomes a defect with a photo and sets the status as your template says.

Send us your own version of this check

We will build it into Escudo Mining with your items and your rule pack, and show it running on a phone underground with no signal.

Or email us: info@escudoready.com