Skip to content
Book a demo
Items
10, in 3 sections

Detector

  1. Detector serialNoteType the number on the label or tag. Stands in for a scan.

Sensors

  1. Methane sensor respondsPass or fail · out of service if it failsFor a detector with this sensor. Remove this item where it does not apply.
  2. Carbon monoxide sensor respondsPass or fail · out of service if it failsFor a detector with this sensor. Remove this item where it does not apply.
  3. Oxygen sensor respondsPass or fail · out of service if it failsFor a detector with this sensor. Remove this item where it does not apply.
  4. Hydrogen sulphide sensor respondsPass or fail · out of service if it failsFor a detector with this sensor. Remove this item where it does not apply.
  5. Carbon dioxide sensor respondsPass or fail · out of service if it failsFor a detector with this sensor. Remove this item where it does not apply.
  6. Nitrogen dioxide sensor respondsPass or fail · out of service if it failsFor a detector with this sensor. Remove this item where it does not apply.

Gas and calibration

  1. Detector calibrationExpiry dateEnter the date on the tag or label. Warns 30 days before.
  2. Bump gas lot numberNote
  3. Bump gas cylinder expiryExpiry dateEnter the date on the tag or label. Warns 30 days before.

Checked by ______________________   Date and time ______________   Unit ______________

A starting point: change the items to match your procedure before you rely on them.

What this checklist asks for

Takes the unit out of service

As the starter is set, a fail on any of these takes the unit out of service until the defect is cleared. You can change what any item does.

  • Methane sensor responds
  • Carbon monoxide sensor responds
  • Oxygen sensor responds
  • Hydrogen sulphide sensor responds
  • Carbon dioxide sensor responds
  • Nitrogen dioxide sensor responds

Questions about this checklist

What does the portable gas detector bump test cover?

10 items in 3 sections: detector, sensors and gas and calibration.

What happens when an item fails in Escudo Mining?

As the starter is set: 6 items take the unit out of service and 2 items restrict it when they fail; the rest are recorded. You can change what any item does. A failure asks for a photo on 6 items, and the defect goes to the people who fix it.

Run it on the phone instead of paper

Open it from the unit’s tag, with or without signal. A failed item becomes a defect with a photo and sets the status as your template says.

Send us your own version of this check

We will build it into Escudo Mining with your items and your rule pack, and show it running on a phone underground with no signal.

Or email us: info@escudoready.com