Skip to content
Book a demo
Suits
Mining plant
Items
12, in 4 sections

Lights and alarms

  1. Warning beacons and lights operationalPass or fail · photo every timeSwitch on every beacon and warning light. Photograph them running. None cracked or missing.
  2. Siren or horn operationalPass or failThe horn, or the siren where fitted. Clearly heard outside the machine.
  3. Headlights and work lightsPass or fail

Underground

  1. Self-rescuers aboard, one for each seatCount against your par level · out of service if it fails
  2. Tag board updatedPass or fail

Machine

  1. Extinguisher aboard, gauge in the greenPass or fail
  2. Fire suppression check done, system healthyPass or failFrom the fire suppression operator check. Stands in for a link to that record. A fault restricts the machine until it is fixed. Where a system is fitted. Remove this item where it does not apply.
  3. Brake test on a decline, or park brake holdsPass or fail · out of service if it fails
  4. Wheel chocks carriedPass or fail
  5. Tyres: pressure and conditionPass or fail
  6. Engine oil, coolant and hydraulic oil levelsPass or fail · out of service if it fails

Readings

  1. Engine hoursEngine hours: recorded, and checked for plausibility · photo every timePhotograph the hour meter with the reading clear.

Checked by ______________________   Date and time ______________   Unit ______________

No limit is shown here on purpose: set each from the maker’s manual or your own procedure. A starting point: change the items to match your procedure before you rely on them.

What this checklist asks for

Takes the unit out of service

As the starter is set, a fail on any of these takes the unit out of service until the defect is cleared. You can change what any item does.

  • Self-rescuers aboard, one for each seat
  • Brake test on a decline, or park brake holds
  • Engine oil, coolant and hydraulic oil levels

Takes a number against your limit

The limit is yours to set; until you do, the number is kept with no pass or fail.

  • Self-rescuers aboard, one for each seat

Meter readings

A meter reading never fails the check. It is refused if it goes backwards, and flagged for an officer if it jumps further than the limit your organisation sets.

  • Engine hours

Needs a photo every time

Taken live on the phone and kept with the answer.

  • Warning beacons and lights operational
  • Engine hours

Questions about this checklist

What does the underground light vehicle or personnel carrier pre-start checklist cover?

12 items in 4 sections: lights and alarms, underground, machine and readings.

What happens when an item fails in Escudo Mining?

As the starter is set: 3 items take the unit out of service and 8 items restrict it when they fail; the rest are recorded. You can change what any item does. A failure asks for a photo on 9 items, and the defect goes to the people who fix it.

Does the underground light vehicle or personnel carrier pre-start come with limits?

No. 1 item takes a number against a limit (self-rescuers aboard, one for each seat), and each limit is yours to set from the maker’s manual or your own procedure. Until you set one, the number is still recorded. Engine hours is recorded every time with no limit to set. A meter reading never fails the check. It is refused if it goes backwards, and flagged for an officer if it jumps further than the limit your organisation sets.

Run it on the phone instead of paper

Open it from the unit’s tag, with or without signal. A failed item becomes a defect with a photo and sets the status as your template says.

Read more from Safe Work Australia. Escudo Ready is independent, and this checklist is a starting point of ours, not a requirement of theirs.

Send us your own version of this check

We will build it into Escudo Mining with your items and your rule pack, and show it running on a phone underground with no signal.

Or email us: info@escudoready.com