Skip to content
Book a demo
Items
9, in 4 sections

Cylinder

  1. Set cylinder pressureReading against your limit · out of service if it failsRead the set’s gauge. Set your minimum from the rated fill pressure.
  2. Pressure drop over 60 secondsReading against your limit · out of service if it failsOpen the cylinder, close it, then watch the gauge for 60 seconds.
  3. Cylinder hydrostatic testExpiry date · out of service if it failsEnter the date on the tag or label. Warns 30 days before.

Warning devices

  1. Low pressure warning whistle soundsPass or fail · out of service if it failsVent slowly. It sounds at the manufacturer’s set point.
  2. Distress signal unit operatesPass or fail · out of service if it fails
  3. Telemetry or tally, if fittedPass or fail

Mask and demand valve

  1. Face mask visor, straps, exhale valve and sealPass or fail · out of service if it fails
  2. Demand valve gives positive pressure, bypass worksPass or fail · out of service if it fails

Harness

  1. Harness, straps and backplatePass or fail

Checked by ______________________   Date and time ______________   Unit ______________

No limit is shown here on purpose: set each from the maker’s manual or your own procedure. A starting point: change the items to match your procedure before you rely on them.

What this checklist asks for

Takes the unit out of service

As the starter is set, a fail on any of these takes the unit out of service until the defect is cleared. You can change what any item does.

  • Set cylinder pressure
  • Pressure drop over 60 seconds
  • Cylinder hydrostatic test
  • Low pressure warning whistle sounds
  • Distress signal unit operates
  • Face mask visor, straps, exhale valve and seal
  • Demand valve gives positive pressure, bypass works

Takes a number against your limit

The limit is yours to set; until you do, the number is kept with no pass or fail.

  • Set cylinder pressure
  • Pressure drop over 60 seconds

Questions about this checklist

What does the breathing apparatus set daily check cover?

9 items in 4 sections: cylinder, warning devices, mask and demand valve and harness.

What happens when an item fails in Escudo Aviation?

As the starter is set: 7 items take the unit out of service and 2 items restrict it when they fail; the rest are recorded. You can change what any item does. A failure asks for a photo on 7 items, and the defect goes to the people who fix it.

Does the breathing apparatus set daily check come with limits?

No. 2 items take a number against a limit (set cylinder pressure and pressure drop over 60 seconds), and each limit is yours to set from the maker’s manual or your own procedure. Until you set one, the number is still recorded.

Run it on the phone instead of paper

Open it from the unit’s tag, with or without signal. A failed item becomes a defect with a photo and sets the status as your template says.

Send us your own version of this check

We load your vehicles, zones and the templates you choose, you validate them in your own words, and your crews start checking. Tell us about your airport.