Skip to content
Ask for an early trial
Suits
Tractor
When
Before use
Items
21, in 9 sections

Cab

  1. Hour meterEngine hours: recorded, and checked for plausibility · photo every timePhotograph the hour meter with the reading clear.
  2. Fuel levelFuel gauge, in eighths: recorded, never failsRead the gauge to the nearest eighth.
  3. ROPS up and locked, seat belt worn as the maker saysPass or fail · off road if it failsKeep the ROPS up and the belt on. Fold the ROPS only where the operator manual allows it, for example under a low branch, and work as the manual says while it is down.

Site and hazards

  1. Slopes, batters and drop-offs on today’s sites knownPass or failKnow where the steep banks, ditches, retaining walls and water edges are. The maker or your procedure sets the slope this machine may work; Escudo never sets one.
  2. Area walked for stones, sticks, wire and objectsPass or failWalk the area first, or follow your procedure for long grass. Pick up or mark anything the blades could throw.
  3. Discharge set away from people, paths, roads and carsPass or failStop the blades when anyone comes close. A stone thrown into a car or a window is reported from the app as an incident.

Compliance

  1. Operator licence or ticket carriedPass or fail
  2. Fire extinguisher service tagExpiry dateEnter the date on the tag or label. Warns 30 days before.
  3. First aid kit expiryExpiry dateEnter the date on the tag or label. Warns 30 days before.

Implements

  1. PTO guard and shaft cover in placePass or fail · off road if it fails
  2. Three-point linkage pins and clips in placePass or fail

Slasher

  1. Slasher blades and bolts: no cracks, bolts tightPass or fail
  2. Slasher guards, chains and skirts in placePass or fail · off road if it failsThe chains or skirts at the front and back catch what the blades throw.
  3. Slipper clutch and gearbox: no leaks, oil levelPass or fail
  4. Skids and tail wheel sound, cutting height setPass or fail

Wheels and tyres

  1. Tyres: pressure, tread and no damagePass or fail · a defect here can never be deferred

Brakes, steering and suspension

  1. Brakes even, park brake holdsPass or fail · a defect here can never be deferred
  2. Steering responds, no excess playPass or fail · a defect here can never be deferred

Lights and reflectors

  1. Headlights, beacon and work lights workPass or fail
  2. Indicators and hazard lights workPass or fail

Leaks

  1. Engine oil and coolant levelsPass or fail · off road if it fails

Checked by ______________________   Date and time ______________   Vehicle ______________

A starting point: change the items to match your procedure before you rely on them.

How it differs from the tractor pre-start

16 of its 21 items are the same on both. This one adds discharge set away from people, paths, roads and cars, slasher blades and bolts: no cracks, bolts tight, slasher guards, chains and skirts in place, slipper clutch and gearbox: no leaks, oil level and skids and tail wheel sound, cutting height set. It leaves out ROPS or cab sound, no damage, horn works, dash warning lights clear after start, wheel nuts tight, none missing, implement hitched, hydraulics connected, no leaks and 1 more.

What this checklist asks for

Never deferrable

A defect from brakes, steering, suspension, tyres, couplings and wheel nuts stays open until it is repaired and cleared.

  • Tyres: pressure, tread and no damage
  • Brakes even, park brake holds
  • Steering responds, no excess play

Meter readings

A meter reading never fails the check. It is refused if it goes backwards, and flagged for an officer if it jumps further than the limit your organisation sets. A fuel level never fails the check. It is recorded in eighths.

  • Hour meter
  • Fuel level

Needs a photo every time

Taken live on the phone and kept with the answer.

  • Hour meter

Questions about this checklist

What does the tractor and slasher pre-start checklist cover?

21 items in 9 sections: cab, site and hazards, compliance, implements, slasher, wheels and tyres and 3 more.

What happens when an item fails in Escudo Fleet?

As the starter is set: 5 items take the vehicle off road and 10 items restrict it when they fail; the rest are recorded. You can change what any item does. A failure asks for a photo on 17 items, and the defect goes to the people who fix it. 3 items are safety critical, so a defect from them can never be deferred.

Is anything on the tractor and slasher pre-start measured against a limit?

No item takes a limit. Hour meter is recorded every time with no limit to set. A meter reading never fails the check. It is refused if it goes backwards, and flagged for an officer if it jumps further than the limit your organisation sets. A fuel level never fails the check. It is recorded in eighths.

Run it on the phone instead of paper

Open it from the vehicle’s tag, with or without signal. A failed item becomes a defect with a photo and sets the status as your template says.

Read more from Safe Work Australia. Escudo Ready is independent, and this checklist is a starting point of ours, not a requirement of theirs.

Start from this checklist

Pick your industry and this template is installed with the others, ready to change into your own words and run on the phone.