Skip to content
Ask for an early trial
Suits
Elevating work platform
When
Before use
Items
21, in 6 sections

Cab

  1. Hour meterEngine hours: recorded, and checked for plausibility · photo every timePhotograph the hour meter with the reading clear.
  2. Fuel levelFuel gauge, in eighths: recorded, never failsRead the gauge to the nearest eighth.

Compliance

  1. Operator manual and logbook on the machinePass or fail
  2. EWP annual inspectionExpiry dateEnter the date on the tag or label. Warns 30 days before.
  3. Operator licence or ticket carriedPass or fail

Before starting

  1. Safety signs and safe working load plate readablePass or fail
  2. Hydraulic hoses and cylinders: no leaksPass or fail
  3. Tyres: no damage, wheel nuts tightPass or fail · a defect here can never be deferred

Platform and boom

  1. Platform, gate and rails: no damage, gate closesPass or fail
  2. Boom, jib and pins: no cracks, keepers in placePass or fail
  3. Harness and lanyard sound, anchor point soundPass or fail · off road if it fails

Running checks

  1. Emergency stops work at ground and platformPass or fail · off road if it fails
  2. Emergency lowering worksPass or fail · off road if it fails
  3. Tilt alarm sounds and cuts out on a slopePass or fail · off road if it failsTest it the way the manual shows.
  4. Platform controls and deadman switch workPass or fail
  5. Flashing light and travel alarm workPass or fail
  6. Platform overload alarm worksPass or fail · off road if it fails
  7. Ground controls override the platformPass or fail · off road if it fails
  8. Outriggers or axle extension lock, where fittedPass or fail · off road if it fails
  9. Drive brakes hold on a slopePass or fail · a defect here can never be deferred

Leaks

  1. Engine oil, coolant and hydraulic oil levelsPass or fail · off road if it fails

Checked by ______________________   Date and time ______________   Vehicle ______________

A starting point: change the items to match your procedure before you rely on them.

How it differs from the scissor lift pre-start

12 of its 21 items are the same on both. This one adds fuel level, tyres: no damage, wheel nuts tight, boom, jib and pins: no cracks, keepers in place, harness and lanyard sound, anchor point sound, platform overload alarm works and 4 more. It leaves out battery charge level, tyres or castors: no damage, scissor arms, pins and keepers: no cracks or gaps, harness and lanyard, where your site asks for one, pothole guards deploy when raised and 1 more.

What this checklist asks for

Never deferrable

A defect from brakes, steering, suspension, tyres, couplings and wheel nuts stays open until it is repaired and cleared.

  • Tyres: no damage, wheel nuts tight
  • Drive brakes hold on a slope

Meter readings

A meter reading never fails the check. It is refused if it goes backwards, and flagged for an officer if it jumps further than the limit your organisation sets. A fuel level never fails the check. It is recorded in eighths.

  • Hour meter
  • Fuel level

Needs a photo every time

Taken live on the phone and kept with the answer.

  • Hour meter

Questions about this checklist

What does the boom lift pre-start checklist cover?

21 items in 6 sections: cab, compliance, before starting, platform and boom, running checks and leaks.

What happens when an item fails in Escudo Fleet?

As the starter is set: 9 items take the vehicle off road and 8 items restrict it when they fail; the rest are recorded. You can change what any item does. A failure asks for a photo on 18 items, and the defect goes to the people who fix it. 2 items are safety critical, so a defect from them can never be deferred.

Is anything on the boom lift pre-start measured against a limit?

No item takes a limit. Hour meter is recorded every time with no limit to set. A meter reading never fails the check. It is refused if it goes backwards, and flagged for an officer if it jumps further than the limit your organisation sets. A fuel level never fails the check. It is recorded in eighths.

Run it on the phone instead of paper

Open it from the vehicle’s tag, with or without signal. A failed item becomes a defect with a photo and sets the status as your template says.

Read more from Safe Work Australia. Escudo Ready is independent, and this checklist is a starting point of ours, not a requirement of theirs.

Start from this checklist

Pick your industry and this template is installed with the others, ready to change into your own words and run on the phone.