Skip to content
Book a demo

The hydrant register

Each hydrant
Its number, type (pillar, underground or other), address and position, with the main size, pressure and owner as your brigade records them.
Status
In service, defective, out of service or not known, with a note. A hydrant taken off the register is kept, never deleted.
Map
A simple map drawn from the recorded positions, with no outside map service. Each hydrant opens in your own map app.
History
Every inspection with who did it, when, the result, the note, the photo and where the phone was.

Officers add and edit hydrants on the dashboard. Every change is in the audit log, and the register exports with the rest of your data.

On the phone

Inspections where the hydrant is

Any crew member can record an inspection. The register is saved on the phone, so a hydrant out of coverage is found and recorded the same way as any other.

  • Hydrants nearest the crew come first when the phone may use its location, otherwise their own station’s
  • Pass or fail, with the defect when it fails, a note, a photo and the position
  • Recorded with no signal, kept on the phone and sent when signal returns, never twice
  • A fail marks the hydrant defective. A pass never puts a defective hydrant back in service: an officer does that after the repair
Defective hydrants

The station’s officers hear about it

A hydrant recorded defective, by an inspection or by an officer, raises an alert for the officers of its station. The alert reaches them when the inspection arrives, even if it was recorded with no signal.

Nothing is sent outside your organisation. Escudo Emergency does not report to the water authority: the alert reminds your officers to tell them in your own usual way.

Intervals

Set by your brigade

Your fleet managers set how often hydrants are inspected and plans reviewed, in days. Both are empty to begin with, and nothing shows as due until you set them. Then the register marks each hydrant and plan as in date, due within 30 days, overdue or never inspected, and the station’s officers get one alert on the day something falls due.

Pre-incident plans

One plan for each site your brigade plans for, written and kept by your officers on the dashboard.

The site
Name, address, position, station, occupancy, hours, building and access, with notes.
Hazards and water
The hazards, the water supply and the hydrants named in it.
Isolation points
Electricity, gas, water, solar, batteries and others, each with where it is and a note.
Dangerous goods
By UN number, name, class, quantity and location, as recorded.
Contacts
Name, role and phone number. On the phone a contact is a tap to call.
Files
Photos and floor plans (PDF, JPEG or PNG) added on the dashboard.

Versions and reviews

Every save is kept as a version. An officer records each review with a note, against the plan’s own interval or your organisation’s.

Read on the way

Every current plan is saved on the crew’s phones and searchable with no signal, by name, street, occupancy, hazard or UN number. Files open when there is signal.

Who does what

Officers keep the register and write the plans. Crews record inspections and read the plans. Fleet managers and administrators set the intervals.

See it

A hydrant fails with no signal, and the plan opens offline

The fire walkthrough’s hydrants film follows a crew member checking hydrants near a school, a failed inspection with a photo, the officer’s alert, and an aged care plan read on the phone on the way to a call.

Records only

Your procedure, your intervals

Escudo Emergency keeps the records and reminds people. What to inspect, how often and what a plan must hold stay with your brigade and its procedures. See everything else it does on the fire and rescue page.

Bring your hydrant list and one plan

We will load them into Escudo Emergency and show your officers the register, an inspection with no signal and the plan on a crew phone.

Or email us: info@escudoready.com