Skip to content
Book a demo
Items
9, in 1 section

Saw

  1. Chain brake worksPass or fail · off run if it fails
  2. Chain catcher presentPass or fail · off run if it fails
  3. Throttle lockout worksPass or fail · off run if it fails
  4. Chain stops when the throttle is releasedPass or fail · off run if it fails
  5. Chain tension correctPass or fail
  6. Bar and sprocket undamagedPass or fail
  7. Bar oil flowsPass or fail
  8. Rear handguard presentPass or fail
  9. Service in date by the registerPass or failThe app shows the date from the equipment register and its certificates. Fail it if none is shown or it has passed. Never typed here.

Checked by ______________________   Date and time ______________   Vehicle ______________

A starting point: change the items to match your procedure before you rely on them.

What this checklist asks for

Takes the vehicle off run

As the starter is set, a fail on any of these takes the vehicle off run until the defect is cleared. You can change what any item does.

  • Chain brake works
  • Chain catcher present
  • Throttle lockout works
  • Chain stops when the throttle is released

Questions about this checklist

What does the chainsaw pre-start checklist cover?

9 items in 1 section: saw.

What happens when an item fails in Escudo Emergency?

As the starter is set: 4 items take the vehicle off run and 5 items restrict it when they fail; the rest are recorded. You can change what any item does. A failure asks for a photo on 9 items, and the defect goes to the people who fix it.

Run it on the phone instead of paper

Open it from the vehicle’s tag, with or without signal. A failed item becomes a defect with a photo and sets the status as your template says.

Send us your own version of this check

We will build it into Escudo Emergency with your items and wording, and show it running on a phone with the defects and status it produces.

Or email us: info@escudoready.com