All checksFire and rescue · Checklist
BA set pre-use check
Before wearing a BA set: cylinder pressure, high pressure leak, low pressure warning, mask seal, the distress signal unit and the tally.
- Items
- 11, in 4 sections
Set
- Set numberNote
- Set in date by the registerPass or failThe app shows the date from the equipment register and its certificates. Fail it if none is shown or it has passed. Never typed here.
- Harness, straps and bucklesPass or fail
- Tally presentPass or fail
Cylinder
- Cylinder pressureReading against your limit
- Cylinder in date by the registerPass or failThe app shows the date from the equipment register and its certificates. Fail it if none is shown or it has passed. Never typed here.
Tests
- High pressure leak test passedPass or fail · off run if it failsAs the maker’s instructions describe it.
- Low pressure warning operatesPass or fail · off run if it fails
- Face mask sealsPass or fail · off run if it fails
- Distress signal unit operatesPass or fail · off run if it fails
Sign-off
- WearerSignature
Checked by ______________________ Date and time ______________ Vehicle ______________
No limit is shown here on purpose: set each from the maker’s manual or your own procedure. A starting point: change the items to match your procedure before you rely on them.
Send us your own version of this check
We will build it into Escudo Emergency with your items and wording, and show it running on a phone with the defects and status it produces.
Or email us: info@escudoready.com